3 Band EQUALIZER

In the below, exist a simple and classic circuit EQUALIZER, three band, low, mid and high frequencies, with gain of regulation [ ±18 dB/oct ].

All potensiometer they are doubly linear and good quality

Related posts:

1. Stereo Phono Preamplifier [RIAA Filter] In the below exist a classic preamplifier PHONO of correction RIAA, for those who they insist they use disks of vinyl. For good precision in the reproduction of sound, should...
2. Modules for Stereo Input Channels For the modules of inputs stereo, exist two choices, that appear in the circuit below. The first choice in left, it is in symmetric input connection , while in the...
3. Electronic Balance Mic-Line Input Module Below, appears one stage with much better characteristics, in symmetric connection , with continuous regulation of stage from the potesometer 22KÙ. My own choices are: IC1-2=NE5532 - LM833, IC3=NE5534 -...
4. Modules For Mono Input Channels It uses integrated circuit , in inverting and possibility of regulation gain of unit, for low levels up to high . My own choice is: IC1=NE5534 - NE5532 - LM833-...
5. Simple LM386 Audio Amplifier For a maximum gain of only 20, leave out the 10 uF connected from pin 1 to pin 8. Maximum gains between 20 and 200 may be realized by adding...
6. Microphone Transistors PreAmplifiers Below exist two choices for preamplifiers of microphone that use transistor, in asymmetrical of input connection. The first choice, are with diode zener, the other choice, use voltages that give...

Related posts brought to you by Yet Another Related Posts Plugin.

del.icio.us Digg it Furl iFeedReaders ma.gnolia Maple.nu Netscape reddit Spurl StumbleUpon Wink Yahoo MyWeb

This entry was posted on Wednesday, January 2nd, 2008 at 3:16 pm and is filed under Audio power amplfier, Audio preamp circuits, Electronics And Projects, Schematics. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.